What is the standard size opening for a refrigerator?

What is the standard size opening for a refrigerator?

Although the average size of a refrigerator varies depending on the type of fridge (bottom freezer, top freezer, French door or side-by-side), standard refrigerator dimensions range from 28 ¾ to 39 ¾ inches in width, 61 ¾ to 71 ¼ inches in height and 28 ¾ to 34 ⅝ inches in depth.

How big should refrigerator opening be?

The minimum dimensions for the refrigerator opening are 70′′ high x 36-1/8′′ wide x 241/2′′ deep. If there is an overhead cabinet, you should allow 1 inch for cabinet door clearance with the top trim piece so the doors can be opened without hitting the top trim.

What is the rough opening for a refrigerator?

The standard size for a professional-grade refrigerator is between 30 to 36 inches wide, 67 to 70 inches tall, and 29 to 35 inches deep. The refrigerator should give you between 14 and 20 square feet of space.

What is the most common refrigerator size?

Standard refrigerator sizes range from 24 to 40 inches in width, 62 to 72 inches in height and 29 to 36 inches in depth. Counter-depth models are frequently available in the french door and side-by-side configurations.

What is the standard size opening for a refrigerator? – Related Questions

What is the size of a small refrigerator?

A typical compact refrigerator is 24 inches wide, 32 inches tall, and has a depth of 24 inches. The refrigerators are very convenient because of how easy they are to set up.

How much space should there be between fridge and wall?

The refrigerator should be at least two inches away from the wall. If you have back coils, you will need at least two inches of top clearance to get rid of heat, but for bottom coil, as little as one inch can suffice. The sides require the least amount of space.

How do I find the capacity of my refrigerator?

Measure the width, depth and height of the inside of your refrigerator with a tape measure. To get the total, divide the numbers by 1728 and then add them together. If you have a refrigerator that is 30′′ wide by 30′′ deep by 48′′ high, you have to take 30 X 30 X 48.

Are all fridges the same width?

Although the average size of a refrigerator varies depending on the type of fridge (bottom freezer, top freezer, French door or side-by-side), standard refrigerator dimensions range from 28 ¾ to 39 ¾ inches in width, 61 ¾ to 71 ¼ inches in height and 28 ¾ to 34 ⅝ inches in depth.

What is standard size refrigerator cubic feet?

The average capacity is between 9 and 30. A family of two needs a lot of fresh food space. Each family member should have an extra foot. A family of two needs a lot of freezer space.

How many cubic feet is a small refrigerator?

The mini fridges are usually 1.7 to 4.5 square feet.

How much space should be on each side of a refrigerator?

Side clearance is the amount of space on both sides of the unit. The rear of the refrigerator needs between one and two inches of space for proper air flow.

How big is a 1.7 cubic feet refrigerator?

1.7cu ft. The product is 19.09′′ L x 17.48′′ W x 19.49′′ H.

Which side should a refrigerator open?

Many of the models of refrigerators today have a single door. The refrigerator doors can be opened either left or right, with the door hinges on the left or right.

Can a refrigerator go in a corner?

Refrigerators are good in the corner.

“If they are in the corner, they won’t block the light or sight-lines. The fridge doors will not impede traffic when they are open. You don’t want someone to run into an open fridge door when they come into the kitchen.”

How wide is a single door refrigerator?

One door refrigerators typically have an average width of 32” | 81.3 cm, and commonly range between from 30”-36” | 76.2-91.4 cm. How long do one door refrigerators last?

How do I make my fridge space bigger?

Counters and cabinets are being cut.

“The lower and upper cabinets should be removed to create more space. You can either install narrower units so that the cabinet doesn’t get completely lost, or the refrigerator will take up the entire space.”

Are kitchen appliances standard sizes?

Standard dishwasher is only 24′′W, but it is more expensive than 18′′W, so you can find them in that size. You can get a stove in 36′′W and even larger if you want.

What does cubic feet mean in a refrigerator?

The capacity of the fridges and freezers is expressed in feet. This is the volume of the inside portion of the appliance. The capacity shows how much food can be kept. The dimensions of the fridges and freezers are shown on a sticker.

What size fridge do I need for family of 4?

The larger fridge capacity you will need is dependent on the number of family members you have. A fridge capacity of 100 to 350L is enough for a family of 1 or 2. I recommend a fridge capacity of 200 to 500L for a family of 2 to 4. A family of 4 will need a fridge capacity of 500L.

How big is a 4 cubic foot fridge?

The smallest mini fridge is 17 inches wide, 18 inches deep and 20 1/2 inches tall. A 4.5 foot model with a separate freezer is 19 inches wide, 20 inches deep and 43 inches tall.

How big is a 3.3 cubic foot refrigerator?

The overall height of the refrigerator is 33.75 feet, width is 18.75 feet, and depth is 44.5 feet. The depth of the refrigerator is 36.25” ( 92 cm).

How big is a 4.3 cubic feet refrigerator?

4.3 Cu. The capacity is Ft. Product dimensions are 22.00′′ L x 19.92′′ W x 32.95” H.

How do you fill a gap between a wall and a stove?

There are things called stovetop extenders. These are made of either vinyl or steel and can be installed to fill the gap between the stove and the wall.

How do you cover a gap between cabinets and walls?

“It’s a tip. Before you caulk, fill larger gaps with foam to decrease the size of the area. Dust and dirt can be found on the wall and cabinet. To prevent caulk from getting into the woodwork and on the wall texture, apply a straight line of painter’s tape to the wall and cabinet on both sides of the gap.”

Can you change the direction a refrigerator door opens?

The door handles can be reversed on almost any door by removing a few screws and bolts.

Leave a Comment